Control Valve Linkage

TM 10-3930-631-34

(3) Check switch actuators for bent or

7-5. Control Valve Linkage

damaged condition.

a. Removal. Refer to TM10-3930-631-12 to

(4) Repair threads if possible. Straighten

remove the control valve linkage. Refer to figure 7-

bent or damaged actuators.

(5) Replace unserviceable parts.

b. Cleaning, Inspection and Repair.

c. Installation. Refer to TM 10 3930-631-12

(1) Clean all parts in cleaning compound,

and install the control valve linkage.

solvent (Fed. Spec. P-D-680) and dry thoroughly.

(2) Inspect threaded rods and devises for

damage to threads.

7-11