Quantcast Figure 4-45. Side shift hose reel, exploded view.

 

Click here to make tpub.com your Home Page

Page Title: Figure 4-45. Side shift hose reel, exploded view.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Figure 4-44. Side shift cylinder, exploded view.
Up
TM-10-3930-631-12 Truck Lift Fork EMD Solid Rubber Tired Wheels 4 000 Lbs Capacity 144 and 180 In Lift Army Model MHE 227 Manual
Next
Figure 4-45.1. Swivel block, exploded view.
TM 10-3930-631-12
(2) Inspect shaft for nicks, burrs, wear and
(6) Inspect drum for dents and bends that
damage.  Remove burrs and nicks with crocus cloth.
could interfere with hose.
Straighten if possible.
Replace shaft if damaged.
Replace damaged drums.
d. Assembly.
(3) Inspect shaft bore in swivel for nicks,
burrs, wear and damage. Remove burrs and nicks with
(1) Install spring (25) in cup (26) and attach
crocus cloth. Replace damaged swivels.
upper end to pin in cup. Install hub (24) inside of spring
(4) Inspect shaft extension and hub for wear
and connect spring to hub. Install shaft extension (23) in
and damage. Replace unserviceable parts.
hub and secure with pin (22).
(5) Inspect spring for cracks and damage.
Replace spring if cracked or damaged.
1.
Hose
8. Lock washer
15.
Drive pin
22.
Pin
2.
Reel, hose
9. Swivel block
16.
Backup ring
23.
Shaft extension
3.
Junction block
10. Packing
17.
Packing
24.
Hub
4.
Screw
11. Setscrew
18.
Nut
25.
Spring
5.
Lock washer
12. Pin
19.
Swivel
26.
Spring cup
6.
Mounting block
13. Retaining ring
20.
Drum
27.
Shaft
7.
Screw
14. Washer
21.
Cover
TA501866
Figure 4-45. Side shift hose reel, exploded view.
(2)  Install new packings (17) and backup
(3) Slide shaft into swivel, using care so as
rings (16) in grooves in shaft (27).  Install pin (15) in
not to damage packings. Install retaining washer (14)
shaft.
and retaining ring (13).
Change 2 4-51.0

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.