Figure 4-33. Seat and mounting, exploded view.

TM 10-3930-631-12

(3) Disconnect seat brake linkage from seat

be replaced, disassemble seat as follows:

(1) Remove screws (1, fig. 4-34), washers

(4) Remove retaining rings (9) and shaft

(2) and nuts (3) and remove back cushion (4) from mat.

(10) and remove plate (4).

Remove screws (5) and remove seat cushion (6).

b. Disassembly. If seat cushions or slides must

1. Lock nut

2. Washer

3. Rubber bumper

4. Plate

5. Screw

6. Lock washer

7. Nut

8. Clip

9. Retaining ring

10. Shaft

11. Brake link

12. Seat assembly

Figure 4-33. Seat and mounting, exploded view.

4-40