e. Remove the jacks and lower the truck and
20.3 NĚ ). After adjustment, tighten lock nut to a torque
of 90 to 100 foot pounds (122.2 to 135.5 NĚ ).
axle to the floor.
c. Tighten axle mounting nuts securely.
f. Refer to TM 10-3930-630-12 and adjust the
d. Refer to TM 10-3930-630-12 and install drag
spindle stop screws and pivot arm screws for correct
links, steering cylinder, rear wheels and floor and toe
Figure 2-10. Rear steering axle, removal and installation.