Section XVIII. ENGINE

TM 10-3930-630-12

Figure 4-59. Steering wheel and horn button, exploded view

Section XVIII. ENGINE

4-79.

General

(2) Check engine oil and coolant levels.

(3) Inspect drive belt for proper tension and

serviceable condition.

The engine is a four cylinder, four cycle, L-head type

(4) Check mounting of starter, alternator, fuel

engine. It is mounted at the rear of the truck beneath

pump and carburetor.

Tighten mounting bolts i

the operator's seat. The flywheel end is directly coupled

necessary.

to the torque converter. A hydraulic pump i directly

(5) Inspect engine mounts for security.

driven by the other end of the crankshaft.

Resilent mounts should be in good condition.

b. Service

4-80.

Engine Assembly

(1) Check engine crankcase oil level (para 3-

a. Inspection To gain access to the engine open

2) and add oil if necessary.

(2) Change oil at intervals specified on current

the side panels and lift the seat and prop in the open

Lubrication Order.

position.

(1) Inspect engine for oil and coolant leaks.

4-70