Figure 4-32. Hydraulic filter, installed view.

TM10-3930-628-12

d. Installation. Refer to b above to service filter, if

necessary. Refer to figures 4-31 and 4-32 and install

filter assembly as follows:

(1) Install two elbows (fig. 4-32) in filter head.

(2) Install filter assembly on bracket and

secure with two screws (4, fig. 4-31) and lock washers

(5).

(3) Remove plugs from hoses. Connect hose

assemblies to elbows. Tighten hose clamps (fig. 4-23)

securely.

(4) Operate truck hydraulic system and check

filter and hoses for leaks.

(5) Add oil to reservoir to bring to FULL mark

on gage.

(6) Install sheet metal cover.

ME 3930-628-12/4-32

Figure 4-32. Hydraulic filter, installed view.

4-32