Lights - TM-10-3930-628-120062

Figure 4-3. Stoplight switch. installed view.

4-23.

Lights

a. Headlight.

(1) Lamp replacement. Remove two screws and separate guard and lens from body. Disconnect wires from lamp

(fig. 4-4), remove locking ring, and remove lamp from headlight. Install lamp in reverse order of removal.

(2) Resistor replacement. Separate guard and lens from body. Unsolder wires from resistor (fig. 4-4) and

unsolder resistor to remove from body. Install resistor of identical value and solder into place. Solder wires to resistor.

(3) Headlight replacement. Remove knob (fig. 4-4) from headlight and remove locking nut. Remove headlight from

bracket and disconnect wires ((I) above) from headlight. Connect wires to new headlight, install in bracket and secure

with nut and adjusting knob.

4-6