| |
TM 10-3930-625-24P
UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND
SPECIAL TOOLS LISTS
SECTION I. INTRODUCTION
1.
scope.
This RPSTL lists and authorizes spares and repair parts;
special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment
required for performance of Unit, Direct Support, and
General Support Maintenance of the Forklift Truck. It
authorizes the requisitioning, Issue, and disposition of
spares, repair parts and special tools as indicated by the
source, maintenance and recoverability (SMR) codes.
2.
General.
In addition to Section I. Introduction, this Repair Parts
and Special Tools List is divided into the following
sections:
a.
Section II. Repair Parts List. A list of
spares and repair parts authorized by this RPSTL for use
in the performance of maintenance. The list also
includes parts which must be removed for replacement
of the authorized parts. Parts lists are composed of
functional groups in ascending alphanumeric sequence,
with the parts in each group listed in ascending figure
and item number sequence. Bulk materials are listed in
item name sequence. Repair kits are listed separately in
their own functional group within Section II. Repair parts
for reparable special tools are also listed in the section.
Items
listed
are
shown
on
the
associated
illustration(s)/figure(s).
b.
Section IlI. Special Tools List. A list of
special tools, special TMDE, and other special support
equipment authorized by this RPSTL (as indicated by
Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE column) for the performance of
maintenance.
c.
Section IV Cross-reference Indexes. A list,
in National Item Identification Number (NIIN) sequence,
of all National stock numbered items appearing in the
listing, followed by a list in alphanumeric sequence of all
part numbers appearing in the listings. National stock
numbers and part numbers are cross-referenced to each
illustration/figure and item number appearance. The fig-
ure and item number index lists figure and item numbers
in alphanumeric sequence and cross-references NSN,
CAGE, and part numbers.
3.
Explanation of Columns (Sections II and IIl).
a.
ITEM NO. (Column (1)). Indicates the
number used to identify items called out in the
illustration.
b.
SMR CODE (Column (2)). The Source,
Maintenance, and Recoverability (SMR) code is a 5-
position
code
containing
supply/requisitioning
information, maintenance category authorization criteria,
and disposition instructions, as shown in the following
breakout:
*Complete Repair: Maintenance capacity, capability,
and authority to perform all corrective maintenance tasks
of the "Repair" function in a use/user environment In
order to restore serviceability to a failed item.
(1) Source Code. The source code tells
you how to get an item needed for maintenance, repair,
or overhaul of an end item/equipment. Explanations of
source codes follows:
1
|
