Cleaning. Inspection and Repair. - TM-10-3930-624-340101

ME 3930-624-34/5-15

10. Split ring

Bleed screw

11. Rod

End head

12. Pin

Hearing

13. Ring

Ram

14. Gland nut

Seal

15. Preformed packing

Wiper ring

16. Ring

Preformed parking

17. Packing

Ring

18. Cylinder tube

Gland

Figure 5-15. Secondary lift cylinder, exploded view.

(3) Replace damaged parts as necessary.

(2) Unscrew the gland (9) and remove the

d. Reassembly. (fig. 5-15.)

gland and rod (11) as an assembly from the

Caution: Be certain that all parts are clean

cylinder tube (18). Remove the split ring (10) and

and that there is no foreign matter in the

remove the gland from the rod (11). Remove. the

cylinder case.

pin (12) and ring (13) from the gland.

(1) Place the outer cylinder tube in a bench

(3) Remove the gland nut (14), preformed

vise, be careful not to apply excessive pressure

parking (15). ring (16) and packing (17).

which might deform the cylinder tube.

c. Cleaning. Inspection and Repair.

(2) Install the gland nut (14) in the cylinder

(1) Clean all metallic parts with solvent.

tube. Tighten securely.

(2) Inspect the ram, rod. cylinder tube, gland

(3) Install the preformed packing (15) and

nut, gland, split ring and bearing for cracks, nicks,

backup ring (16) on the outside of the gland (9).

scores, dents, excessive wear on sliding surfaces,

stripped threads or other damage.

5-17