c. NATIONAL STOCK NUMBER (Column (3)).
(8) In the Special Tools List section, the Basis Of
Lists the National stock number (NSN) assigned to the
Issue (BOI) appears as the last line(s) in the entry for
Item. Use the NSN for requests/requisitions.
each special tool, special TM DE, and other special
When density of equipments,
d. FSCM (Column (4)). The Federal Supply Code
supported exceeds density spread indicated in the basis
for Manufacturer (FSCM) is a 5-digit numeric code which
of issue, the total authorization is increased
is used to identify the manufacturer, distributor, or
Government agency, etc., that supplies the Item.
g. U/M (Column (7)). The Unit of Measure (U/M)
e. PART NUMBER (Column (5)). Indicates the
indicates the measure (e.g., foot, gallon, pound) or count
primary number used by the manufacturer (individual,
(e.g., each, dozen, gross) of a listed item. A two-
company, firm, corporation, or Government activity),
character alpha code (e.g., FT, GL, LB, EA, DZ, GR)
which controls the design and characteristic of the item
appears in this column to indicate the measure or count.
by means of its engineering drawings, specifications
If the U/M code appearing in this column differs from the
standards, and inspection requirements to identify an
Unit of Issue (U/I) code listed in the Army Master Data
item or range of items.
File (AMDF), request the lowest U/I that will satisfy your
h. QTY INC in UNIT (Column (8)). The Quantity
Incorporated in Unit (QTY INC in UNIT) indicates the
When you use an NSN to requisition
quantity of the item used in the breakout shown on the
an Item, the item you receive may
illustration figure, which is prepared for a functional
have a different part number from the
group, subfunctional group, or an assembly. A "V"
part ordered, but go ahead and use
appearing in this column in lieu of a quantity indicates
or furnish it as the replacement part.
that no specific quantity is applicable (e.g., shims,
f. DESCRIPTION (Column (6) ).
includes the following information:
4. SPECIAL INFORMATION.
(1) The Federal item name and, when required, a
minimum description to identify the item.
a. Bulk materials required to manufacture items are
listed in the Bulk Material Group of this manual. NSN's
for bulk materials are also referenced in the description
column of the line item entry for the item to be
(3) Items that are included in kits and sets are listed
instructions for items source coded to be manufactured
below the name of the kit or set.
or fabricated are found in TM 10-3930-623-12 or
(4) Spare/repair parts that make up an assembled
Item are listed immediately following the assembled Item
b. Detailed assembly instructions for items source
line entry. If the first Item of a figure is indented, the
coded to be assembled from component spare/repair
assembly appears as the last item in the previous figure.
TM 10-3930-623-34. Items that make up the assembly
(5) NSN's for bulk materials are referenced in the
are listed immediately following the assembled item
description column in the line item entry for the item to
c. Line item entries for repair parts kits and sets
(6) When the part to be used differs between serial
appear as the last entries in the repair parts listing for
numbers of the same model, the effective serial numbers
the figure in which their parts are listed as repair parts.
are shown as the last line of the description.
(7) The USABLE ON CODE. Not applicable.
|Integrated Publishing, Inc.|