Section II. TABLE OF SPECIFICATIONS - TM-10-3930-622-140032

SECTION II

TABLE OF SPECIFICATIONS

2-1.

TABLE OF SPECIFICATIONS.

Refer to

reassembly and installation of components during

Table 2-1 for the most pertinant specifications and

replacement and overhaul.

clearances covering the vehicle.

2-3.

VEHICLE DIMENSIONS. Refer to figure 2-1 for

2-2.

TORQUE VALUES. Refer to Table 2-2 for the

the most important dimensions related to this vehicle.

appropriate torque values to be utilized during

TABLE 2-1. TABLE OF SPECIFICATIONS

1. GENERAL

Gross vehicle weight ......................................... 9,620 lb

Type of vehicle ....................... Fork Lift Truck, Gasoline

Attachments .................................. Overhead guard and

Engine Powered

load safety backrest

Rated capacity.............................. 6000 lb. at 24 inches

2. ENGINE

from heel of fork

Model .............................................Hercules QXDL3ER

Lift type .................................. Telescopic upright boom,

Tiltable 3 deg forward

No. of cylinders ............................................................ 6

10 deg backward from vertical

Bore and stroke.............................. 3-7/16 in. x 4-1/4 in.

Lift elevation (max) ..............................................173 in.

Displacement ............................................. 236.7 cu. in.

Fork data .......................... 4 in. wide prongs, 40 in. long

Oil pressure (max) .......................... 26 psi @ 1600 rpm

adjustable 11.25 to 48 inches

Oil pressure idling (min) ................................ 5 to 10 psi

Wheels ....................................................4 drive wheels

and 2 steerable wheels

Firing Order ................................................... 1-5-3-6-24

Tires (pneumatic) .......... Drive, 7:50 x 15 x 12 ply rating

Main bearing front .......................... 2-1/2 in. x 1-5/16 in.

Steer, 7:50 x 10 x 14 ply rating

Main bearing center ..................... 2-1/2 in. x 1-15/16 in.

Vehicle turning radius ..................... 104 in. min. outside

turning radius

Main bearing rear ......................... 2-1/2 in. x 1-15/16 in.

Vehicle speed range................................ 1 to 12.5 mph

Main bearing intermediate.............. 2-1/2 in. x 1-7/32 in.

Overall dimensions

Connecting rod bearing.......................... 2 in. x 1-1/4 in.

Oil capacity

Height (forks fully lowered) ...........................110 in.

Crankcase ......................................................... 5 qt

Height (forks fully raised) ...........................221.5 in.

Filter................................................................... 1 qt

Total................................................................... 6 qt

Width ...............................................................63 in.

Water capacity ....................................................... 13 qt

Length less forks .....................................109-3/4 in.

Weight (Bare engine) ........................................... 565 lb