Figure 6-4. Removing housing and drum.

TM 10-3930-621-34

Figure 6-5. Removing disc and drum assembly

(6) Remove converter housing from disc and drum

(7) Remove forward gear and shaft as follows (fig.

assembly by removing retainer ring (7, fig. 6- 7) on

turbine input shaft (8) and sliding housing from disc and

(a)Remove bolts (10) and lock washers (9) holding

drum assembly (fig. 6-5). Remove bearing (27, fig. 6-3)

bearing retainer (8) and gasket (7) to case and remove

from

housing.

retainer with gasket. Discard gasket.

6-5