Figure 3-71. Power steering pump, exploded view.

1. Screw

10. Drive shaft

2. Gasket

11. Seal

3. Plug

12. Idler shaft

4. Pin

13. Gear (2)

5. Cap nut

14. Pin

6. Gasket

15. Retaining ring (2)

7. Screw

16. Retaining ring 121

8. Spring and ball assembly

17. Key

9. Spring

18. Bearing 141

Figure 3-71. Power steering pump, exploded view.

(8) Remove relief valve cap nut (5), copper

Warning: Use

approved

gasket (6), adjusting screw (7), and spring and ball

cleaning solvent. Wear suitable eye

assembly (8).

protection when using compressed

(9) If needle bearings (18) or oil seal (11) are

air.

to be changed, use a puller to remove them from

(1) Clean all parts, except oil seal, in solvent

housing and / or stator.

and dry using compressed air.

d. Cleaning and Inspection.

3-81