Quantcast KEY to fig. 3-24

 

Click here to make tpub.com your Home Page

Page Title: KEY to fig. 3-24
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Figure 3-24. Hydraulic system, schematic diagram.
Up
TM-10-3930-620-34 Truck Lift Fork Solid Rubber Tired Wheels 6000 Capacity 180 Inch Lift Manual
Next
Figure 3-25. Tilt cylinder, exploded view.
KEY to fig. 3-24
35.
Hose assembly
36.
Elbow
1.
Elbow (2)
37.
Pipe plug
2.
Elbow
38.
Elbow
3.
Hose assembly
39.
Hose assembly
4.
Hose clamp
40.
Elbow
5.
Elbow (2)
41.
Hose (2)
6.
Hose assembly
42.
Loop clamp (3)
7.
Hose assembly
43.
Screw
8.
Branch tee (2)
44.
Stud (2)
9.
Hose assembly
45.
Lock washer (3)
10.
Elbow (2)
46.
Washer (2)
11.
Hose assembly
47.
Nut (3)
12.
Hose clamp
48.
Hose (2)
13.
Screw
49.
Swivel fitting
14.
Lock washer
50.
Hose
15.
Nut
51.
Elbow (2)
16.
Elbow
52.
Reducer (2)
17.
Elbow
53.
Elbow (2)
18.
Hose clamp (2)
54.
Reel assembly
19.
Hose
55.
Side shift cylinder
20.
Elbow
56.
Tilt cylinder assembly (2)
21.
Filter
57.
Tube
22.
Elbow
58.
Clamp
23.
Hydraulic oil reservoir
59.
Washer
24.
Breather
60.
Screw
25.
Level gage
61.
Nut
26.
Filler screen
62.
Washer
27.
Pipe plug
63.
Angle adaptor (2)
28.
Elbow
64.
Bushing
29.
Pipe plug
65.
Flow regulator
30.
Hose clamp (2)
66.
Secondary lift cylinder
31.
Hose
67.
Primary lift cylinder
32.
Strainer element
68.
Pump motor
33.
Adaptor
69.
Hydraulic pump
34.
Elbow
a. Removal.  Remove tilt cylinder (TM 10-3930-
3-17. Hydraulic Oil Filter
624-12).
The hydraulic oil filter is connected into the hydraulic oil
b. Disassembly. (fig. 3-25.)
reservoir return line. The filter assembly consists of a
(1) Place the tilt cylinder in a vise. Extend the
filter head, preformed packing, 25 micron filter element,
rod to its fully extended position.
and body. The 25 micron filter element is changed after
(2) Using a spanner wrench, unscrew the
the first 25 hours of use, after 100 hours of use, and at
gland nut (1) from the tube assembly (13).
each 200 hour interval thereafter. A preset bypass valve
(3) Secure the yoke (20) in a vise. Remove
is incorporated into the body. Hydraulic oil is allowed to
the bearing (11) and packing (12).
bypass the element and flow (unfiltered) continuously if
(4) Remove the nut (23), lock washer (22)
the element becomes blocked or clogged. Refer to TM
and screw (21) and remove the yoke (20) from the rod.
10-3930-620-12 for replacement.
3-18. Tilt Cylinder
3-39

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.