Figure 3-19. Torque converter and pump assembly, disassembly, and reassembly.

(7) Carefully work transmission assembly

forward until transmission case clears torque converter,

and remove from truck.

NOTE

Jacking screws may be used in the

two tapped holes in the transmission

case to aid in removal.

(8) To remove torque converter from engine

flywheel, refer to paragraph 2-9 c.

(9) To remove pump from turbine shaft, mark

pump and converter housing to insure proper

reinstallation. Remove capscrews holding pump and

collector ring to converter housing.

(fig.

3-18).

Figure 3-18. Pump removal and installation.

d. Disassembly.

(1) Refer to figure 3-19 and disassemble the

torque converter from the flywheel drive plate.

1 Bolt

17 Housing

2 Plate

18 Bolt

3 Capscrew

19 Lockwasher

4 Lockwasher

20 Support

5 Converter

21 Preformed packing

6 Pump assembly

22 Preformed packing

7 Bolt

23 Preformed packing

8 Lockwasher

24 Snap ring

9 Preformed packing

25 Seal

10 Capscrew

26 Seal

11 Oil seal

27 Plug

12 Shaft

28 Plug

13 Housing

29 Seal

14 Bolt

30 Spring

15 Lockwasher

31 Ball

16 Plate

Figure 3-19. Torque converter and pump assembly, disassembly, and reassembly.

3-23