Figure 3-9. Steering gear, exploded view.

TM 10-3930-609-35

n. Do not disassemble ball nut from wormshaft

(2) Carefully withdraw ball guides from ball

nut.

unless binding, roughness or excessive looseness is

detected when ball nut is rotated. from end to end of

(3) With ball guide holes in ball nut facing

worm. If disassembly is required, proceed as follows:

downward, rotate ball nut over a pan or other container

until all balls have dropped out.

(1) Remove screw and clamp which retain

ball guides in ball nut.

(4) Remove ball nut endwire from wormshaft.

Figure 3-9. Steering gear, exploded view.

3-15