Fuse Holder

TM 10-3930-609-35

on travel motor. Attach horn to adapter. Replace floor

(1) Remove cover from control panel

plate (TM 10-3930-609-12).

compartment (TM 10-3930-609-12).

(7) Connect master cylinder brakeline at

(2) Disconnect positive battery jumper from

brakeline fitting (fig. 2-13) on drive axle.

bus bar at right side of fuse holder (fig. 2-14).

(8) Install mast assembly on truck (para 2-

(3) Disconnect lead 86 from fuse FU5

terminal, disconnect lead 83 from fuse FU4 terminal,

disconnect lead 78 from fuse FU2 terminal, and

2-25. Fuse Holder

disconnect leads 69-1 and 69-2 from fuse FU1 terminal.

a. Removal.

(4) Remove screws which secure fuse holder

to fuse panel; then, withdraw fuse holder.

Figure 2-14. Parts location on control panel.

2-20