Installation. - TM-10-3930-609-350024

TM 10-3930-609-35

Figure 2-10. Hydraulic tank.

(4) Disconnect draglink at steering gear arm

b. Installation.

(TM 10-3930-609-12).

(1) With lift carriage raised for access,

(5) Raise lift carriage for easier access and

position steering gear in truck and secure to body with

remove three screws and lockwashers securing steering

three screws and lockwashers.

gear to truck body.

(2) Attach steering gear column to instrument

(6) Support steering gear and remove two

panel and directional control switch conduit with clamps,

clamps securing steering gear to directional control

nuts and lockwashers.

switch conduit and instrument panel by removing

(3) Connect draglink to pitman arm and

attaching nuts and lockwashers. Pull steering gear out

check steering linkage adjustment (TM 10-3930-609-

of truck.

12).

2-15