Hydraulic Lines and Fittings - TM-10-3930-609-120067

TM 10-3930-609-12

Figure 3-20. Control Levers and linkage.

(2) Remove and discard filter element and

fective parts and replacement with new hydraulic

element seal.

lines and fittings. Visually inspect hydraulic

(3) Install new filter element and seals by

lines and fittings during operation for signs of

reversing procedures (1) and (2) above.

hydraulic fluid leakage or restrictions signified

by operational malfunction. Tag hydraulic lines

3-62. Hydraulic Lines and Fittings

as they are disconnected to facilitate installation

Organizational maintenance of the hydraulic

and cap hoses or plug parts, as required, to ex-

lines and fittings is limited to removal of de-

clude dirt or other contamination.

3-29