Figure 3-2. Seat assembly.
(2) Open side covers and lower top cover.
3-18. Floor Plate
(3) Use a small diameter drift pin and
drive top and side cover hinge pins out to re-
(1) Disengage accelerator pedal from ac-
lease covers and remove covers from truck.
celerator rod by pulling pedal upward.
(2) Remove four screws and flatwashers
b. Installation. Reverse procedure in a above.
securing floorplate (fig. 3-3) to frame and re-
Oscillate door while mating hinges to facilitate
installation of hinge pins.
move floorplate from truck.