| |
TM 10-3930-243-34P
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND
SPECIAL TOOLS LISTS
SECTION I. INTRODUCTION
1. Scope.
This RPSTL lists and authorizes spares and repair
parts; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special
support equipment required for performance of
Direct Support and General Support Maintenance of
the Truck, Lift, Fork. It authorizes the requisitioning,
issue, and disposition of spares, repair parts and
specal tools as indicated by the source,
maintenance and recoverability (SMR) codes.
2. General.
In addition to Section i. Introduction, this Repair Parts
and Special Tools List is divided into the following
sections:
a. Section II. Repair Parts List. A list of spares
and repair parts authorized by this RPSTL for use in
the performance of maintenance. The list also
Includes parts which must be removed for
replacement of the authorized parts. Parts lists are
composed of functional groups in ascending
alphanumeric sequence, with the parts in each group
listed in ascending figure and item number
sequence. Bulk materials are listed in item name
sequence. Repair kits are listed separately in their
own functional group within Section Il. Repair parts
for reparable special tools are also listed in the
section, Items listed are shown on the associated
illustration(s)/figure(s).
b. Section III. Special Tools List. A list of special
tools, special TM DE, and other special support
equipment authorized by this RPSTL (as indicated by
Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE column) for the performance of
maintenance.
c. Section IV, Cross-reference Indexes. A list, in
National Item Identification Number (NIIN) sequence,
of all National stock numbered items appearing in the
listing, followed by a list in alphanumeric sequence of
all part numbers appearing; in the listings. National
s t o c k n u m b e r s a n d p a r t n u m b e r s a r e
cross-referenced to each illustration/figure and item
number appearance. The figure and item number
index lists figure and item numbers in alphanumeric
sequence and cross-references NSN, CAGE, and
part numbers.
3. Explanation of Columns (Sections II and Ill).
a.
ITEM NO. (Column (1)). Indicates the number
used to identify items called out in the illustration.
b. SMR CODE (Column (2)). The Source,
Maintenance, and Recoverability (SMR) code is a
5-position code containing supply/requisitioning
information, maintenance catagory authorization
criteria, and disposition instructions, as shown in the
following breakout:
*Complete Repair: Maintenance capacity, capability,
and authority to perform all corrective maintenance
tasks of the "Repair" function in a use/user
environment in order to restore serviceability to a
failed item.
(1) Source Code. The source code tells you
how to get an item needed for maintenance, repair,
or overhaul of an end item/equipment. Explanations
of source codes follows:
1
|
