Figure 3-132. Two wheel steering lock cylinder, removal and installation.

d. Repacking Cylinder. Refer to paragraph 3-64c

KEY to figure 3-131 (sheet 2 of 2):

1 Nut

11 Setscrew

for repacking procedures.

2 Piston

12 Spring washer

e. Inspection.

13 Washer

3 Packing assembly

(1) Inspect rod for nicks and scratches.

4 O-ring

14 Packing assembly

(2) Inspect head for cracks.

5 Adapter

15 Flange

(3) inspect piston for nicks and burrs.

6 Packing assembly

16 Wiper

17 Screw

7 Piston

(4) inspect shell and lug end for cracks and

18 Rod end

8 O-ring

dam age.

9 Backup ring

19 Rod

(5) Replace a defective part.

20 Shell

10 Nut

(6) Remove scratches and nicks with crocus

cloth.

3-65. Two Wheel Steering Lock Cylinder

f . Reassembly. R e f e r t o f i g u r e 3 - 1 3 3 a n d

a. General. The 2-wheel steering lock cylinder is

reassemble two wheel steering lock cylinder.

m o u n t e d to the right rear wheel. The cylinder

g. Test. Refer to paragraph 3-64g and test the

hydraulically locks the rear wheel in the no-steering

cylinder.

position and the front wheels are used for steering.

h. Installation. Refer to figure 3-132 and install

b. Removal. Refer to figure 3-132 and remove

two wheel steering lock cylinder.

c. Disassembly. Refer to figure 3-133 and

disassemble two wheel steering lock cylinder.

Figure 3-132. Two wheel steering lock cylinder, removal and installation.