Figure 3-2. Ether primer servicing,

TM10-3930-242-12

Section IV. OPERATOR/CREW MAINTENANCE PROCEDURES

Loosen the clamp and remove the cup. Remove the

3-6. Engine Air Cleaner Inspection

element and inspect it for excessive accumulation of

dirt. Remove the cup dust trap and inspect for

WARNING

If NBC exposure is suspected, all air filter me-

excessive accumulation of dust. Report to

dia should be handled by personnel wearing

organizational maintenance for Servicing.

protective equipment. Consult your unit NBC

Officer or NBC NCO for appropriate handling

3-7. Ether Primer

or disposal procedures.

Refer to figure 3-2 and service the ether primer.

Figure 3-2. Ether primer servicing,

3-8. Battery

electrolyte. The electrolyte should be one-half inch

Visually inspect batteries for damage, such as loose

above the plates. Replace vent cap. Inspect cables

and battery holddown hardware for corrosion.

terminal posts or warped internal plates. Remove

battery cell vent caps (fig. 3-3) and check the level of

Change 3