Figure 2-.3 Driving on improued surfaces.

TM10-3930-242-12

START ENGINE (REF. PARA. 2-3).

STEP 1:

PULL FORK LIFT CONTROL LEVER TO RAISE FORKS 12 TO 18 INCHES OFF OPERATING

STEP 2:

SURFACE.

PLACE DRIVE SELECTOR LEVER (LOCATED TO REAR OF PARKING BRAKE) IN TWO-

STEP 3:

WHEEL DRIVE POSITION.

DISENGAGE PARKING BRAKE AND APPLY SERVICE BRAKES.

STEP 4:

PLACE TRANSMISSION RANGE CONTROL LEVER IN DESIRED POSITION, DEPENDING ON

STEP 5:

WEIGHT OF LOAD. PLACT FWD-NEUT-REV CONTROL LEVER IN DESIRED POSITION.

RELEASE SERVICE BRAKES.

STEP 6:

PRESS ACCELERATOR PEDAL AND PROCEED.

STEP 7:

TA501572

Figure 2-.3 Driving on improued surfaces.

figure 2-5 for instructions for driving in snow or

c.. Driving on Unimproved Surfaces. Refer to

sand.

figure 2-4 for driving instructions in surf. Refer to

2-5

Change 2