| |
TM 10-3930-235-24P
Code
Application/Explanation
PA
Stocked items; use the applicable NSN to
PB
request/requisition items with these
PC*
source codes. They are authorized to the
PD
category indicated by the code entered In
PE
the 3d position of the SMR code.
PF
** Items coded PC are subject to
PG
deterioration.
Items with these codes are not to be re-
KD
quisitioned individually. They are part of a
KF
kit which is authorized to the maintenance
KB
category indicated in the 3d position of the
SMR code. The complete kit must be
requisitioned and applied.
MO-(Made at UM/
Items with these codes are not
AVUM Level)
to be requested/requisitioned
MF-(Made at DS/
individually. They must be
AVUM Level)
made from bulk material which
MH-(Made at GS
is identified by the part number
Level)
in the DESCRIPTION AND
USABLE
ON CODE (UOC)
ML-(Made at Spa-
column and listed in the Bulk
cialized Repair
Material group of the repair
Activity
parts list in this RPSTL. If the
(SRA))
item is authorized to you by the
MD-(Made at
3d position code of the SMR
Depot)
code,
but
the
source
code
indicates it is made at a higher
level, order the item from the
higher
level
of
maintenance
items with these codes are not
AO-(Assembled by
to be requested/requisitioned
UM/AVUM
Individually. The parts that
Level)
make up the assembled item
AF-(Assembled by
must be requisitioned or
DS/AVIM
fabricated and assembled at
Level)
the level of maintenance
AH-(Assembled by
indicted by the source code if
GS Category)
the 3d position code of the SMR
code authorizes you to
AL-(Assembled by
replace the item, but the
SRA)
source code indicates the item
AD-(Assembled by
is assembled at a higher level,
Depot)
order the item from the higher
level of maintenance.
XA -
Do not requisition an "XA"-coded item. Order
its next higher assembly. (Also refer to the
NOTE following.)
XB -
If an "XB" Item is not available from salvage,
order it using the CAGE and part number
given.
XC -
Installation drawing, diagram, instruction
sheet, field service drawing, that is identified
by the manufacturer’s part number.
XD -
Item is not stocked. Order an "XD"-coded
item through normal supply channels using
the CAGE and part number given, if no NSN
is available.
NOTE: Cannibalization or controlled exchange, when
authorized, may be used as a source of supply for
items with the above source codes, except for those
source coded "XA" or those aircraft support items
restricted by requirements of AR 700-42.
(2)
Maintenance
Code.
Maintenance
codes tell you the level(s) of maintenance authorized to
USE and REPAIR support items. The maintenance
codes are entered in the third and fourth positions of the
SMR code as follows:
(a)
The maintenance code entered in
the third position tells you the lowest maintenance level
authorized to remove, replace, and use an item. The
maintenance code entered in the third position will
indicate authorization to one of the following levels of
maintenance.
Code
Application/Explanation
C -
Crew or operator maintenance done within
unit
maintenance
or
aviation
unit
maintenance.
O -
Unit maintenance or aviation unit category
can remove, replace, and use the item.
F -
Direct support or aviation intermediate level
can remove, replace, and use the item.
H -
General support level can remove, replace,
and use the item.
L -
Specialized
repair
activity
can
remove,
replace, and use the item.
D -
Depot level can remove, replace, and use
the item.
(b)
The maintenance code entered in
the fourth position tells whether or not the item is to be
repaired and identifies the lowest maintenance level with
the capability to do complete repair (i.e., perform all
authorized repair functions). (NOTE: Some limited repair
may be done on the item at a lower level of maintenance,
if authorized by the Maintenance Allocation Chart (MAC)
and SMR codes.) This position will contain one of the
following maintenance codes:
Code
Application/Explanation
O -
Unit maintenance or aviation unit is the
lowest level that can do complete repair of
the item.
2
|