 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 Section VI. EXHAUST SYSTEM
(2) Remove clamps from both ends of ex-
30. Muflfer
haust inlet pipe, then separate inlet
a. Inspection.
pipe from muffler.
(1) Inspect muffler for good condition and
secure mounting.
(3) Remove clamp that attaches exhaust
(2) Check to see that both the exhaust in-
tailpipe to muffler.
let pipe (fig. 13) and exhaust tail pipe
(4) Loosen nut on clamp (fig. 13) at clamp
are securely clamped to the muffler
bracket, then separate tailpipe from
and that there are no visible signs of
leaks.
muffler.
(3) Check to see that drain holes in the
(5) Remove nut and bolt with two wash-
muffler are at lowest point and are not
ers and two grommets that attach
clogged.
muffler to frame and remove muffler.
b. Removal.
c. Installation. Reverse procedure in b above
(1) Block unit up to a height suitable to
work underneath.
and inspect in accordance with a above.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals