 |
|||
|
|
|||
|
Page Title:
Section X. STEERING (GROUP 14) AND BODY (GROUP 18) |
|
||
| ||||||||||
|
|
 1
Link, connecting
4
Cup.
2
Boots
5
Spring
3
6
Body, wheel cylinder
Figure 86. Wheel cylinder, exploded view.
Section X. STEERING (GROUP 14) AND BODY (GROUP 18)
frame and remove steering gear assembly
54. Steering Gear
from trucks
a. Removal.
b. Disassembly.
(1) Remove floor plates.
(1) Loosen nut (53, fig. 87) and back off the
(2) Remove transmission shift levers, shaft,
setscrew (54).
and linkage (TM 10-3930-222-20).
(2) Remove bolt (5566) and fiat washers (56)
(3) Remove horn button assembly (TM 10-
that attach side cover (52) to housing (28)
3930-2 220).
and remove cover and gasket (51).
(4) Remove steering wheel nut (10, fig. 87)
(3) Slide shaft assembly (47) from housing and
from steering cam (post) (24).
disassemble shaft , assembly as follows:
(5) Using suitable puller (fig. 88), remove
(a) Slide retaining washer (48), shims
steering wheel from post.
(44), and thrust washer (45) from
(6) Disconnect all hydraulic lines at steering
shaft.
valve body (19, fig. 87).
(b) Straighten tang on washer (49) and
(7) Remove nut (29) and lockwasher (30) that
remove nut (50), washer (49), and
secure pitman arm (31) to shaft (47).
spacer (48) from bearing (46).
Remove pitman arm.
(c) Remove bearing from shaft.
(8) Remove steering post bracket (fig. 88)
from upper cover (5, fig. 87).
(4) Remove capscrews (4) and flat washers (3)
(9) Remove nut and lockwasher that secure
that attach upper cover assembly (5) to
shifting shaft bracket assembly to
housing and remove cover and gasket.
instrument panel (fig. 88).
Remove
(5) Mark valve body (19) and housing (28) for
bushing if necessary.
reassembly.
(10) Remove nuts, lockwashers, and mounting
bolts that attach steering gear assembly to
102
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals