Section XIII. HOOD (GROUP 17), BODY (GROUP 18) AND OVERHEAD GUARD (GROUP 22)

TM 10-3930-222-20

Section XIII. HOOD (GROUP 17), BODY (GROUP 18)

AND OVERHEAD GUARD (GROUP 22)

b. Installation. Reverse procedures in a above.

77. Hood

79.

Seat Cushion, Backrest Cushion, and Seat

a. Removal.

(1) Remove the screws, lockwashers, and

Frame

bushings that secure the hood (fig. 84) to the

support brackets on each side of the hood.

a. Removal.

(2) Remove the hood from the truck.

(1) Remove the seat panel.

(3) Slide the springs off the spring guides.

(2) Remove the nuts and washers that secure the

(4) Remove the nuts and washers and remove

seat frame to the panel and remove the seat

the spring guides.

frame.

(5) Remove the nuts and washers that secure the

hood levers to the truck and remove the hood

b. Disassembly.

levers.

(1) Unscrew the nuts and bolts that secure

the

cushion seat to the seat frame and slide

the

b. Installation. Reverse procedures in a above.

cushion from the frame.

(2) Remove phillip head screws that secure

the

78. Overhead Guard

backrest cushion to the frame and remove

the

backrest cushion.

a. Removal.

c. Inspection. Inspect cushions for excessive wear,

(1) Remove the capscrews and lockwashers that

secure the overhead guard to the truck frame.

rips, and other damages; seat frame for cracks and

(2) Using a suitable hoist, remove the overhead

breaks; and hardware for damaged threads and other

guard from the truck.

forms of mutilation.

Replace damaged items as

necessary.

d. Assembly. Reverse procedures in b above.

e. Installation. Reverse procedures in a above.

129