LUBRICATION ORDER - LO-10-3930-669-120001

LO 10-3930-669-12

LUBRICATION ORDER

21 JANUARY 1997

TRUCK, LIFT, FORK, CLEAN BURN DIESEL, FRONT/SIDE LOADING

6,000 LB CAPACITY MODEL R60SL-DC

NSN 3930-01-378-7497

References: TM 10-3930-669-10, TM 10-3930-669-20, TM 10-3930-669-34, TM 9-4910-709-14&D,

FSC C9100-IL

Approved for public release; distribution is unlimited.

REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS

this manual. If you find any mistakes or if you know of a way to

improve the procedures, please let us know. Mail your letter, DA Form 2028

(Recommended Changes to Publications and Blank Forms) to: Commander, US Army

Tank-automotive and Armaments Command, ATTN: AMSTA-IM-OPIT, Warren, Ml

48397-5000. A reply will be furnished to you. You may also provide DA Form 2028-2

information to TACOM via datafax or e-mail. TACOM's datafax number for AMSTA-IM-

OPIT IS (810) 574-6323 and the e-mail address iS: amsta-im-opit@cc.tacom-tech-pubs

@cc.tacom.army.mil.

Maintenance Levels. This Lubrication

specified is the time needed to do all the

services prescribed for a particular interval.

Order(L0) is for Operator/Crew and Unit

On-condition (OC) oil sample intervals shall be

Maintenance. The lowest level of maintenance

authorized to lubricate a point is indicated by

applied unless changed by the Army Oil

Analysis Program (AOAP) laboratory. Change

either Operator/Crew (C) or Unit Maintenance

the hard-time interval if lubricants are

(0). Operator/Crew may lubricate points

contaminated or if operating the equipment

authorized for Unit Maintenance when

under adverse operating conditions, including

authorized by Unit Maintenance.

longer-than-usual operating hours. The calendar

interval may be extended during periods of

Locators. Points indicated with dotted lines are

low activity. If extended, adequate preservation

lubricated on both sides of the forklift.

precautions must be taken. Hard-time intervals

Reference to the appropriate localized view is

will be applied in the event AOAP laboratory

given after most lubrication entries.

support is not available. Hard-time intervals

Localized views begin on Card 9.

must be applied during the warranty period.

Intervals shown in this lubrication section are

Lube Intervals. Intervals (on-condition or

hourly. Notes are located on Cards 19 to 21.

hard-time) and the related man-hour times are

based on normal operation. The man-hour times

Card 1 of 22