SUPPORT BEARING

LO 10-3930-643-12

LUBRICATION ORDER

Note 22.

SUPPORT BEARING

Note 24.

AXLEL LUBRICANT

lubricant

to the

Apply

remote

NOTE

fitting (45) until clean lubricant

appears.

Front

and

rear

axles

are

checked in the same manner.

Remove the filler and level plug (47

or 48). If the lubricant is below

the level hole, fill as necessary to

bring level up to the bottom of the

hole.

Install the filler and level plug.

Note 23.

STEERING GEAR

Check

the

lubricant

level

removing the top bolt (46). If the

lubricant is below the bolt hole,

add lubricant through the hole as

necessary.

Note 25. TRANSMISSION AND FILTER

The transmission oil capacity is 5 gallons. Place a

suitable container under the drainplug. After all oil

is drained, clean and install drain plug. Remove

transmission/torque converter oil filter and dis-

card. Clean the filter base. AppIy a thin coat of

clean oil to the gasket on the base of new filter and

install filter.

Card 16 of 17