EXPECTED TEMPERATURE - LO-10-3930-631-120003

LO 10-3930-631-12

* KEY -

EXPECTED TEMPERATURES

Above +150F

+40to -15F

+40to -650F

LUBRICANTS

CAPACITY

(Above -9C)

(+4to -260C)

(+4to -54C) INTERVALS

OE/ - Lubricating

OE/HDO 10

OEIHDO 10

HDO Oil, Internal

Combustion

Engine, Tactical Service

OEA- Lubricating

OEA

Oil, Internal

(See Note 1)

Intervals

Combustion,

given are

Arctic

of normal

- Oil Can.

Points

(See Note 2)

Hydraulic

5.9 gals. in hours

Reservoir)

(22.3L

GO - Lubricating

GO 85W/140

GO80W/ 90

190GO 75W

Oil, Gear

Multipurpose

- Drive Axle.

5 pts

(2.4L)

BFS - Brake Fluid,

Automotive

ALL TEMPERATURES

- Brake Master

3 pts.

Cylinder

(1.4L)

GAA- Grease,

Automotive

ALL TEMPERATURES

and Artillery

*See Note 6 for lubricant specification number

2. OIL CAN POINTS. Each 50 hours lubricate seat

NOTES:

and parking brake linkage, most interlock, and control

FOR OPERATION OF EQUIPMENT I

valve linkage, pins, and devises and all exposed

PROTRACTED COLD TEMPERATURE BELOW -15F

adjusting threads with OE/HDO-10.

(-260C).

Remove lubricant prescribed in Key for

temperatures abo\par-150F (-260C). Relubricate with

3. HYDRAULIC FILTER ELEMENT. Each 200 hours,

lubricant specified in Key for temperatures below -150F

remove element, clean filter housing and install new

(-260C).

If OEA lubricant is require to meet the

element, after replacement, operate hydraulic system for

temperature ranges prescribed in the Key, OEA lubricant

5 minutes, check for leaks, check level and bring to

is to be use in place of OE/HDO-10 lubricant for a

"FULL"

mark

temperature ranges where OE/HDO-10 specified in the

Key.

TA 219938

CARD 3 OF 4