28 FEBRUARY 1984
(Supersedes LO 10-3930-631-12, 12 MARCH 1975)
TRUCK, LIFT, FORK, EMD, SOLID RUBBER TIRES,
4000 LB CAPACITY, 144 AND 180 INCH LIFT
(ALLIS-CHALMERS MODELS ACE 40AEE-144
AND ACE 40AEE-180, ARMY MODEL MHE-227)
(NSN 3930-00-327-1603), 144-INCH LIFT
Reference: TM 10-3930-631-12 and FEDRAL SUPPLY CATALOG C9100-IL.
Clean parts or fittings with dry cleaning solvent (SD),
Hard time intervals and the related man-hour times are
Type I! or equivalent. Dry before lubricating. Dotted
based on normal operation.
The man-hour time
arrow shafts indicate lubrication on both sides of
specified is the time you need to do all the services
equipment. A dotted circle indicates a drain below.
prescribed for a particular interval Change the hard
Relubricate all items found contaminated after fording or
time interval if you lubricants are contaminated or if you
washing. The lowest level of maintenance authorized to
are operating the equipment under adverse operating
lubricate a point is indicated by one of the following
conditions, including longer than-usual operating hours.
symbols as appropriate: Operator/Crew (C); and
The hard time interval may be extended during periods
Organizational Maintenance (O).
of low activity. If extended, adequate preservation
precautions must be taken.
Reporting errors and recommending improvements.
You can help us improve this manual. If you find any
mistakes, or if you know of a way to improve the
procedures, please let us know. Mail your letter or DA
Dry cleaning fluid is flammable. Do not use near a flame
Form 2028 (Recommended Changes to Publications and
or excessive heat. Use only with adequate ventilation.
Blank Forms) direct to: Commander, US Army Tank-
Avoid prolonged breathing of vapors and minimize skin
Automotive Command, ATTN: DRSTA-MB, Warren, MI
48090. A reply will be furnished to you.
· The time specified is the time required to perform all services at the particular interval.
CARD 1 OF 4