LO 10 3930-624 12
12 March 1984
(Supersedes LO 10-3930-624-12-1, and -2; 24 FEBRUARY 1971)
TRUCK, LIFT, FORK; POWER SHIFT, GED,
6,000 LB CAPACITY, SRT, 180 INCH LIFT,
(ALLIS CHALMERS MODEL F60-24PS-180)
(ARMY MODEL MHE 212) (NSN 3930-00-489-0263)
Reference: TM 10-3930-624-12 and FEDERAL SUPPLY CATALOG C9100-IL.
Hard time intervals and the related man-hour times are
Clean parts or fittings with dry cleaning solvent (SD),
based on normal operation. The man-hour time specified
Type II or equivalent. Dry before lubricating. Dotted arrow
is the time you need to do all the services prescribed for
shafts indicate lubrication on both sides of equipment. A
a particular interval. Change the hard time interval if
dotted circle indicates a drain below. Relubricate all items
your lubricants are contaminated or if you are operating
found contaminated after fording or washing.
the equipment under adverse operating conditions,
including longer than-usual operating hours. The hard
The lowest level of maintenance authorized to lubricate a
time interval may be extended during periods of low
point is indicated by one of the following symbols as
activity. If extended, adequate preservation precautions
Operator/Crew (C); and Organizational
must be taken.
Reporting errors and recommending improvements.
You can help improve this manual. If you find any
Dry cleaning fluid is flammable. Do not use near a flame
mistakes, or if you know of a way to improve the
or excessive heat. Use only with adequate ventilation.
procedures, please let us know. Mail your letter or DA
Avoid prolonged breathing of vapors and minimize skin
Form 2028 (Recommended Changes to Publications and
Blank Forms) direct to: Commander, US Army Tank-
Automotive Command, ATTN: DRSTA-MB, Warren, MI
48090. A reply will be furnished to you.
*The time specified is the time required to perform all services
at the particular interval.
LO 10-3930-624 12
CARD 1 OF 7